iBasso PB5 Portable Balanced Tube Amp

 2-4 weeks
Notify me when in stock
(0) Write a review
Free delivery via SuperSaver 2-4 working days


  • Nutube input/Super Class A discrete output amp
  • Output power <1,700 mW per channel
  • Frequency response 20hz-40Khz
  • 4.4mm output impedance <0.3ohms


In the Box

  • To Be Confirmed

Clearance products


Dual Nutube 6P1 Vacuum Tubes

Manufactured by KORG and Noritake, the 6th Gen Nutube operates exactly as a conventional triode vacuum tube and creates the same characteristic rich overtones that are sought after in triode tubes.  At the same time, Nutube achieves substantial power savings, miniaturization, and quality improvements when compared with many conventional vacuum tubes.

Voltage amplification is achieved with the Nutube, which results in a captivating and distinctive vacuum tube sound, all while maintaining exceptional linearity. 

Unprecedented Six Batteries Form an Efficient Pure Power Supply

The PB5 utilizes 6 batteries to establish a robust power supply system. The Nutubes are powered by two batteries while the other 4 batteries function as the power supply for the secondary amplifier.  With our efficient and pure power supply, you will experience very immersive and crystal-clear sound.

24 Position, 4 Section Stepped Attenuator

Extremely diminutive 24 position, 4 section stepped attenuator.

Optimal analogue volume control enhances the ability to showcase the distinct analogue characteristics of our vacuum tube amplifier.

The channel imbalance is within a range of less than +/-0.1dB.

When adjusting the volume, the noise floor is simultaneously attenuated.

Excellent Power Delivery, 1700mW+1700mW@32ohm Driving Power

With the 6-battery power supply and transistor current amplifier, the PB5 delivers up to 1700mW+1700mW@32ohm.

Two-step Suspension & Cathode Input To Minimize Microphonics & Interference

The two-step suspension absorbs vibration mechanically and minimizes the microphonic effect. The cathode input reduces the impedance, resulting in reduced signal interference from external sources.

A Tube AMP For The MAX Users

The PB5 can use a line input voltage of up to 2.5 volts.

If higher than this, the sound will have distortion.

If you are using the DX220MAX, DX300MAX, or DX320MAX's line out with the PB5, please do not use the highest gain setting.


Alternative products that may interest you