{"product_id":"ferrum-hypsos-dual-output-hybrid-power-system","title":"Ferrum HYPSOS Dual Output Hybrid Power System","description":"\u003cp\u003eThe Ferrum HYPSOS Dual Output is the two-output version of Ferrum’s HYPSOS hybrid power system, designed and made in Poland by HEM. HYPSOS is not a simple power supply but an audio component in its own right, and its power reserves are so large that it can easily run two devices at once, as long as they need the same supply voltage: for example Ferrum’s OOR headphone amplifier and WANDLA DAC, or two other devices with the same requirements, without another external box and the cable spaghetti that comes with it.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-hero.jpg?v=1791350985\" alt=\"Ferrum HYPSOS Dual Output hybrid power system\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eA hybrid power system\u003c\/h3\u003e\n\u003cp\u003eHYPSOS combines linear and switching techniques to get the advantages of both: the low ripple and noise of a linear supply with the fast transient response and high efficiency of a switching one. Ferrum’s aim is a detailed and revealing yet unfatiguing sound that lets your system perform to its potential. HYPSOS is software-controlled, with as few hardware-dependent elements as possible, so it can benefit from future software improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-glow.jpg?v=1791350989\" alt=\"Ferrum HYPSOS with its copper-coloured front panel\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSweet Spot Tuning\u003c\/h3\u003e\n\u003cp\u003eSweet Spot Tuning (SST) lets you fine-tune the output voltage for the best sound. Within the safe range set by your device’s manufacturer, you can adjust the level on the fly and compare the results without risking damage to your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-sweetspot.jpg?v=1791350994\" alt=\"Sweet Spot Tuning on the Ferrum HYPSOS display\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTwo user levels, one universal supply\u003c\/h3\u003e\n\u003cp\u003eChoose a pre-configured setting from Ferrum’s list of supported devices, or set custom parameters manually. A wide continuous output range of 5–30V, with up to 6A delivered to the load, makes HYPSOS as universal as it gets. The output voltage and DC plug polarity are controlled electronically, so you can power a lot of equipment without buying different versions of the product or cable, and HYPSOS always asks you to confirm the parameters before it applies power, whether you chose a device from the list or entered them by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-confirm.jpg?v=1791351000\" alt=\"Confirming the output parameters on the Ferrum HYPSOS\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003e4T Sensing Design\u003c\/h3\u003e\n\u003cp\u003eFerrum’s output cable has four wires: two deliver the power and two carry feedback, so HYPSOS can keep the voltage exactly right at your device’s DC input at every moment. This 4-Terminal Sensing Design (4TSD) eliminates the harmful effects of the cable’s resistance and significantly speeds up current delivery at the device, improving transient response. You can use 4T Sensing and Ferrum’s Spread Spectrum Mode in whichever combination you prefer. On the Dual Output, 4TSD is active on the main output only.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-cable.jpg?v=1791351003\" alt=\"Ferrum’s 4-wire DC output cable with 5.5mm plug\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAutomation and safety\u003c\/h3\u003e\n\u003cp\u003eHYPSOS works with an Apple TV remote and has a trigger input and output, and it can power your devices up automatically from standby even without a dedicated trigger connection. It is also extremely safe to use, with Automatic Transformer Voltage Adjust (ATVA), an electronic output-voltage polarity switch, and over-voltage, current limit and short-circuit protection.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-rear.jpg?v=1791351006\" alt=\"Rear panel of the Ferrum HYPSOS Dual Output: main and aux DC outputs, trigger, USB and mains inlet\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/FERRUMHYPSOS-DUAL_942x558_4dcfc15c-ed33-4abc-a1c3-14743f879274.jpg?v=1767222653\" alt=\"The main and aux DC outputs of the Ferrum HYPSOS Dual\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-board.jpg?v=1791351012\" alt=\"The ARM microcontroller inside the Ferrum HYPSOS\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/ferrum-hypsos-dual-output-hybrid-power-system-photo-stack.jpg?v=1791351017\" alt=\"Ferrum HYPSOS Dual Output stacked with a Ferrum component\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e5–30V DC · up to 80W and 6A continuous, both outputs combined · same voltage on both outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e4T Sensing\u003c\/th\u003e\n\u003ctd\u003eMain output only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e110–120V and 220–240V AC, 50–60Hz (EU\/US version) · IEC C14 inlet, fuse holder, power switch, two-stage EMI filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower use\u003c\/th\u003e\n\u003ctd\u003eAbout 6VA idle · 133.9VA at about 80W load (230V in, 12V out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuse\u003c\/th\u003e\n\u003ctd\u003eIEC 5 × 20mm, 250V 2A slow-blow (EU\/US)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eDisplay and knob · Apple TV remote · trigger in\/out · auto power-up from standby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and weight\u003c\/th\u003e\n\u003ctd\u003e217 × 206 × 50mm (without knob, feet and connectors) · 3.05kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth outputs share one voltage, so both devices must need the same supply voltage.\u003c\/li\u003e\n\u003cli\u003eOne DC cable comes in the box, with a 5.5 × 2.5mm or 5.5 × 2.1mm plug: contact us when you order if you need a particular one. For the second device, add a \u003ca href=\"\/products\/ferrum-4-pin-to-jack-dc-power-chord-5-5-x-2-5mm\"\u003eFerrum 4-pin to 5.5 × 2.5mm\u003c\/a\u003e or \u003ca href=\"\/products\/ferrum-4-pin-to-jack-dc-power-chord-5-5-x-2-1mm\"\u003e4-pin to 5.5 × 2.1mm\u003c\/a\u003e cable, or the \u003ca href=\"\/products\/ferrum-power-link-fpl-dc-power-chord-4-pin-dc-50cm\"\u003eFerrum Power Link\u003c\/a\u003e for Ferrum components.\u003c\/li\u003e\n\u003cli\u003eFerrum’s compatibility list shows the devices HYPSOS has settings for.\u003c\/li\u003e\n\u003cli\u003eIn the box: HYPSOS Dual Output, mains cable, DC cable and documentation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrum","offers":[{"title":"Default Title","offer_id":57117544186243,"sku":"FERRUMHYPSOS-DUAL","price":1595.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/3199\/8339\/files\/img_proxy_7128d019-2c4d-474e-8139-6a55e5f1e9e7.jpg?v=1767222675","url":"https:\/\/www.advancedmp3players.co.uk\/products\/ferrum-hypsos-dual-output-hybrid-power-system","provider":"amp3","version":"1.0","type":"link"}